General Care

Regular cleaning with a soft brush and or vacuuming of the furniture will help keep your furniture looking its best. Accumulated dust will accelerate the wear of covers.

Avoid sitting on the arms or edges of cushions this can distort and reduce the life expectancy of the furniture. Avoid sharp objects, buckles, jewellery, etc as well as household pets from coming into contact with the fabrics as these can snag and cause pulls. It is advisable that you discourage children from using the furniture to demonstrate their gymnastic or trampolining abilities.

Avoid keeping your furniture directly in sunlight or reflective light as this can cause fading and premature wear. DO NOT allow furniture to come into contact with a direct heat source.

All our fabrics are approved for dry cleaning.

Decorative facias and trims are usually treated with a resilient lacquer and should be cleaned with a soft wet cloth or duster. NEVER polish or use solvent cleaners.

Zip Fasteners are mostly used for ease of filling and assembly during manufacture and do not necessarily indicate that covers are removable. If you should ever have cause to remove zipped items take great care in replacing them correctly never force a zip or get fabric trapped when fitting. NEVER lift items by the zips.

Notes

Caring for your cushions and fibre interiors. Non reversible cushions should be repositioned frequently so that wear is spread evenly throughout the cushions. Reversible cushions should also be turned as well as repositioned. Any fibre cushions should be regularly and vigorously plumped to retain their look and performance. IMPORTANT foam seat cushions will in the first few weeks lose 20% of their original hardness, this is quite normal and will not affect their long term performance.

Fabrics

Due to the nature of certain fabrics there are sometimes slight variations in colour shading, this can even occur within the same batch and should not be regarded as a defect. Exacting care is taken to ensure reasonable matches at all times and this will have been checked throughout the production process.

Cleaning Spots And Spills

For all spillages it is recommended you use a soft absorbent cloth to soak up the initial spillage. Avoid excessive rubbing as this may cause damage and discoloration to the fabric. If the spillage has caused staining we recommend you contact specialist cleaners who are equipped to deal with such occurrences.

Customer Information-Please Read Before Use Of Goods

Please note that if you have wooden or laminate flooring care should be taken when moving your furniture. It is recommended that 2 people should lift and place the furniture into position and never slide across the flooring. It Is also recommended that you place furniture glides, wooden feet or twister bases on protective pads (NOT INCLUDED) to eliminate the possibility of scratching. We cannot be held responsible for any damage caused, due to customer’s choice of flooring, in all cases it is the customer’s responsibility to ensure adequate protection is used to keep a barrier between their floor and the furniture. Any feet that are attached by the customer or retailer is also at the customer’s own risk, feet that are attached this way should be periodically checked to ensure they are correctly tightened as movement may cause some loosening over time.

Step

 

– Connection made through hook system

– Hook 1 to be inserted into hook 2.

 




Step

 

– Place furniture in space allocated.

– Line up pieces, checking that hooks are in alignment.

– Lift part A and insert Hook 1 into hook 2 to connect to part B.

 

 




Step

 

– Place furniture in space allocated.

– Line up pieces, checking that hooks are in alignment.

– Lift part A and insert Hook 1 into hook 2 to connect to part B.

 



Step

 

– Place furniture in space allocated.

– Line up pieces, checking that hooks are in alignment.

– Lift part A and insert Hook 1 into hook 2 to connect to part B.

 

 

Foot Type 1


Unpackage foot and check for damages


Turn sofa over Locate pre-drilled hole from transport
Glide on to bottom of the sofa


Screw foot into metal inserts until hand tight


If necessary, check orientation of foot
If provided, insert locking screw


Foot Type 2


Unpackage foot and check for damages


Place foot into position


Screw foot into position using screws provided


Foot Type 3


Unpackage foot and check for damages


Place foot into position on part A


Screw foot into position on part A using screws provided


Screw foot into position on part B using screws provided


Screw foot into position on part B using screws provided


Step


Arm attached


Step


Underside of sofa


Step


Zipped base & x2 lower fixings


Step


Rear x1 upper fixing


Step


Wing nut & washer


Step


Remove wing nut


Step


Remove washer


Step


No washer

Step







 




Step


Locate the transit tie, untie it and remove.



Step

Lift the seat cover and find the closest bar to you while facing the sofa bed, then pull it upward and toward yourself. The sofa bed will smoothly unfold towards you.


Step

Once the bed is lying flat, pull the rear bar towards you.


Step



Step

Ensure the middle support bar is placed on a level surface. Proceed to unfold the rest of the bed, extend the mattress, and ensure that all feet are resting firmly on the floor. The bed is now ready for use!